How To Setup VLAN Trunk Using Bridge on Mikrotik Router

In this tutorial, shows you how to configure a VLAN for small networks (SoHo) by using a mikrotik router. This small network has 2 lan gateway (cable and wifi) that is set on in a single physical interface. For a local network via a cable created VLAN with ID 10 and the via wifi created with VLAN ID 20. For detailed network topology as follows :

 VLAN Trunk Configuration using winbox on Mikrotik Router

You can follow the steps below to configure VLAN trunk on mikrotik router using winbox :
1. Create trunk bridge to foward tagged packet

2. Add port or interface that you want to foward the VLAN in the trunk-bridge

3. Create new VLAN interface on bridge-trunk interface

6. Connect ether 2 mikrotik router using LAN cable to switch manageable and configure the switch as desired.
7. Configure ether 1 in order to connect to the internet.